BLACK LEATHER COLOUR RESTORER, LEATHER PAINT / AND MATT SEALER KIT FOR REPAIR AND RECOLOUR OF LEATHER.
Matt Black Leather colourant kit.
The Leather Colour Doctor Leather restorer liquid polyurethane leather dye colourants are water based
so are safe and easy to use leather dyes. Suitable leather re-colouring for Sofas, Car interiors,
Upholstery, Shoes, Handbags, Clothes. Spray and sponge friendly so they’re extremely simple to apply,
above all scuff and scratch resistant. Being almost the same consistency as water,
making spraying easy will not cause blockages when used in airbrush.
The polyurethane leather dye Colourants have been designed for colour restoration and colour change jobs
so the pigment addition is very high allowing them to easily cover leather without the need for lots of applications.
Have you a scuffed, worn, scratched or faded leather item, or you would like a colour change? then this product is for you please read on.
1- Firstly fully De grease leather (this is a water based product) sand surface if rough with 800 grit sandpaper. Make good any rips or cracking. (see our other products)
2- Pad or sponge a first light coat, leave to dry or use a hair dryer to speed up dry time.
3- Add further coats with a sponge or for a smoother look use an airbrush until desired depth of colour is achieved.
4- When dry you can apply the top coat Matt to seal against scuffing and colour migration.
5- Leather Matt Sealer spray or sponge 3 coats of sealer, drying in between coats with hair dryer. Leave for 24 hours to set before use. Do not rub or clean item for a further 7 days.
You will receive 1 bottle of black dye and 1 bottle of Matt sealer in each size of kit.
All our colours have a Pantone reference simply type into your browser the Pantone number and a swatch colour will be seen. (eg Pantone 102) we can match any colour for you
Most importantly our polyurethane leather dye is capable of resisting scuffs and scratches. The PU leather dye Colourants are extremely hard wearing and will not scratch unless very heavily forced.
Water-borne aliphatic, aromatic, polyester and polyether urethane polymers are fully reacted, high molecular weight, colloidal dispersion’s that are available in a wide range of solids, hardness and gloss ranges. Polymers are polyurethane dispersion (PUD) that can be cross-linked with conventional water-borne cross-linkers to enhance protection properties. The line of 1 K polyurethane dispersion’s provides protection properties typical for cross-linked polymers without the use of external cross-linkers. All polyurethane dispersion technologies are easy to handle, readily applied using all conventional techniques, and are compatible with acrylic emulsions.
Polyurethane dispersion technologies are used in both commercial and industrial applications in many market areas. Coatings for wood, masonry, roofing, direct-to-metal, automotive interior, breathable sportswear and graphic arts are just a few of the markets served.
Whether an application requires abrasion resistance, adhesion, water resistance, solvent resistance, rapid hardness development, flexibility, softness of hand, hydrolytic stability, durability, humidity resistance or any other specific performance property, Product capabilities are constantly analysed to enhance polymer properties for specific applications, old and new. The leather colour doctor only sell first class polyurethane dispersion’s with new nano tech pigments.
Colours available are black red blue green brown orange purple grey orange we can match any colour.
Supplied in 50 ml 250 ml 500 ml - 1 litre 5 Litre containers.
The leather colour doctor
Always test first underneath the item you are treating.