BMW Leather dye Colourant FULL CAR INTERIOR REPAIR re-colouring sealer kit
BMW Leather dye Colourant FULL CAR INTERIOR REPAIR re-colouring sealer kit
£ 65.00
Order in the next Hours Mins and Seconds,
To get your item delivered on Tuesday
Enquire About This Product
Carbusonic BMW Full Leather Interior Dye Kit Large Complete Easy To Use 5 Step Kit 
Suitable For Car Interior Colour Changes Sealing Repairs Restoration
This Kit Contains All Items You Need To Produce A Professional Re-colour or Colour Change.
Carbusonic LTD Introduce The Leather Colour Doctor Large Automotive Dye Kit.
Everything You Need To Completely Change The Colour Of You're Sofa Or Car Interior.
This Product Is A Permanent Scuff Proof Waterproof Colourant Kit.
Follow These 5 Easy Steps To Safely Transform Any Leather Item.

You Will Receive Numbered Bottles 1-5
Use Each In Number Order 1-5 Easy

Step 1 
Using Bottle 1: Leather Foaming Cleaner
Apply Leather Foaming Cleaner With A Soft Plastic Scrubbing Brush In A Circular Motion
Leave For 5 Minutes 
Wipe Away Soil Debris Grease & Grime With Clean Cloth
Repeat Until Your Cloth Is Clean On Wiping.

Step 2
Using Bottle 2: Leather Prep-Solvent
Apply Leather Prep-Solvent With A Clean Cloth
Wipe Over Item Paying Special Attention To Headrest, Arms, Side Bolsters & Any Body Contact Areas.
Wipe Until A Small Amount Of Pigment Is Visible On Your Cloth
This Is Normal & Indicates You Have Cut Through Old Sealing Layer.
Repair Any Flaws Rips Rough Areas Etc Now With Supplied Filler
Sand Areas Again 500-1000 g
Then Wipe Down A Final Time.

Step 3
Using Bottle 3: Leather Adhesion Promoter
Used As A Primer Apply Leather Adhesion Promoter With A Sponge or roller
Using A Light Coat Wipe Over The Surface & Dry With  A Hair Dryer
Repeat 3 Times Alternating Direction Of Wipes Dry Again.

Step 4
Using Bottle 4: Leather Dye Colour base
Test A Small Patch First On Reverse
If The Colour Is Optimal.
Continue To Apply A First Light Coat With Sponge Or Spray
Dry With Hairdryer
This Will Look Patchy This Is Normal
Continue To Add Further Coats Drying In between
If Spraying Thin With Water, Spray Close To  Surface To Stop Premature Drying And Rough Patches. 

Step 5
Using Bottle 5: Leather Sealer Top Finish
Apply With Sponge Or Spray In Light Coats
Dry With Hairdryer In between Coats
Alternate Direction Of Coat At 45 Degree Angles To Scatter Light Reflection.
Leave Entire Project For 24 Hours To Set.


KIT INCLUDES
500 ML FOAMING LEATHER CLEANER
500 ML PREP SOLVENT CLEAN
500 ML ADHESION PROMOTER
1 LITRE OF BMW LEATHER DYE COLOUR MATCHED
500 ML FINISH SEALER (MATT, SATIN OR GLOSS)
50 ML SCRATCH AND CRACK  REPAIR PASTE
1 PAIR DISPOSABLE GLOVES


Protection Cream Use Monthly to Keep your Leather in top condition  Click here for leather protection  and stain guard cream safeguard your project from accidental spills and UV cracking 
Customer Reviews (0)